Skip to content
MGPMGP InfrastructurePrivate Limited

Solar & Green

Rooftop Solar & O&M

Residential and commercial rooftops — installed, then kept generating.

What this service is

In plain terms.

Rooftop solar is the most common form of distributed generation, and the most commonly neglected. Modules lose output to dust and bird soiling, strings fail silently, and inverters throw errors nobody reads. Operation and maintenance is what converts an installed system into an actually-generating asset — scheduled cleaning, electrical testing, and a monthly report you can compare against your bill.

Scope of work

What a standard engagement includes. Anything outside this is quoted separately and agreed in writing before it is executed.

Residential, commercial and institutional rooftop installation
Structure, module and inverter installation
Net metering coordination
Scheduled module cleaning
String and inverter performance testing
Fault diagnosis and rectification
Earthing and lightning protection checks
Monthly generation reporting and performance ratio tracking

Enquire about this service

An engineer who works on this specific service will call you back.

We use your details only to respond to this enquiry. We never sell or share them.

How we execute it

From enquiry to handover.

Six defined stages. You always know which one you are in and what closes it.

01

Assessment

Roof area, orientation, shading and consumption pattern are reviewed to size the system to your actual bill.

02

Proposal

System size, expected generation, expected savings and payback presented in plain figures.

03

Installation

Structure, modules, inverter, cabling and protection installed with waterproofing at every roof penetration.

04

Net metering

Documentation prepared and coordinated with the distribution licensee through to meter change.

05

O&M cycle

Scheduled cleaning and testing visits with a checklist and photographic record per visit.

06

Reporting

Monthly generation, performance ratio and any faults raised or closed, in one short report.

Equipment

  • Module cleaning systems with soft brushes and demineralised water
  • String testers and clamp meters
  • Thermal imaging for hotspot detection
  • Insulation and earth resistance testers
  • Rooftop fall-protection equipment

Team on the job

  • Solar O&M technician
  • Licensed electrician for AC-side work
  • Cleaning crew from our facility division
  • Reporting and performance analyst

Compliance governing this work

  • Electrical Contractor Licence — Government of Maharashtra
  • Net metering coordination with the distribution licensee
  • Roof work fall protection and permit discipline
  • Statutory labour cover for all deployed staff
See every licence and registration

On site

Rooftop Solar & O&M in execution.

These slots are reserved for MGP's own site photography of this exact service.

Before you commit

Questions buyers actually ask.

Answered directly, including where the honest answer is a qualification rather than a yes.

In most Maharashtra locations, once or twice a month through the dry season and after any dust event. Sites near cement plants, quarries, unpaved roads or heavy bird activity need more. We set the frequency from your measured soiling loss, not from a generic schedule.

More in Solar & Green

Need rooftop solar & o&m?

Send us the site details and the scope you have in mind. If a survey is the sensible first step, we will say so rather than quoting blind.

Prefer to talk?+91 88308 89392
CallWhatsAppEnquire